26
How to use (continued)
Chapter 1 Handling the Product
■
Function and Performance
Item Check method Criteria When failed
Operational
Check
• Press the push button to
check the operation.
• To travel smoothly. No meandering and
vibration.
• The electric chain hoist moves in the same
direction as that of the push button operation.
• When the operation is stopped, the motor
stops immediately.
• When the Emergency Stop Button is pressed,
all hoist motions stop.
• When operating other push button while the
Emergency Stop Button is pressed, the hoist
does not start operation.
• When canceling the Emergency Stop Button,
the hoist operates normally.
Refer to Chapter 2
“Failure Cause,
Guidance for
Countermeasure" (P94
to 97).
Brake • Press the push button to
check the operation of the
Brake.
• When the operation is stopped, the Brake is
applied and the motor stops immediately.
Carry out the inspection
in accordance with the
items in Chapter 2
“Periodic inspection"
Electromagnetic Brake
(P84).
■
Daily Inspection of Manual Trolley (TSG/TSP)
■
Appearance
Item Check method Criteria When failed
Indication of
Nameplates
and Labels
• Check visually • No peel off. Indication can be seen clearly. Clean and repair the
label or replace with a
new label.
Deformation
and damage
of each part
• Check visually • No apparent deformation and corrosion
• No apparent deformation on the Frame
Replace the deformed
or damaged part.
Loosened
or fallen off
bolts, nuts
and split pins
• Check visually or using
tools.
• Bolts, nuts and split pins are fastened
securely.
• Even a drop off of a split pin
may cause of drop of the
body size. Be sure to check it.
Drop off of split pin may result in death
or serious injury.
Mandatory
DANGER
Fasten bolts, nuts and
split pins securely.
●
Check the following item with no load.
1
How to Use
Daily Inspection of Motorized Trolley (MR2) / Daily Inspection of Manual Trolley (TSG/TSP)
To Next Page
Loading...
Need help?
General
