EasyManuals Logo

KITO ER2 Series User Manual

KITO ER2 Series
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #15 background imageLoading...
Page #15 background image
15
Checking the Marks
Code
Load Chain size
: diameter (mm)
Mark Mark pitch
ER2-001H/IH
4.3 FT-DAT 24 LinksER2-003H/IH
ER2-003S/IS
ER2-005L/IL
6.0
RH-DAT
20 Links
ER2-005S/IS
ER2-010L/IL
7.7 20 Links
ER2-010S/IS
ER2-016S/IS
10.2 16 LinksER2-020L/IL
ER2-020S/IS
ER2-025S/IS 11.2 12 Links
ER2-032S/IS 10.2 16 Links
ER2-050S/IS 11.2 12 Links
RH-DAT 0000 RH-DAT
Mark pitch
First markSecond mark Second mark
Front side : RH-DAT
or
FT-DAT
Back side : H23
Front side : Original Lot No. of the
Load Chain (4 digits)
Back side : KITO
Be sure to check that the Load Chain has "RH-DAT" or "FT-DAT" mark on it and the chain size is
appropriate for the ER2 model you are using. (See the following thable.) The Load Chain of other
models (such as model ES or ER) or different rating cannot be used.
Use of the Load Chain of other model or other rating may result in death or serious injury due to the drop of the lifted
load.
Mandatory
The mark (RH-DAT) to indicate the model of the Load
Chain is indicated on it at an equal spacing. Make sure
that the Load Chain is of a chain size (wire diameter)
appropriate for ER2 referring to the table in the left.
Recording the Initial
Value
When opening the package, fill in
the table in the right with the opening
dimension "a" between embossed
marks on the Bottom Hook, the width
of the hook "b" and the thickness of
the hook "c". (These values are used
for checking. Record the value for the
top hook of ER2 when it is used individually.)
Dimensions when the package was opened
b
c
a
Embossed marks
Top Hook
(For ER2 only)
Dimension a
mm
Dimension b
mm
Dimension c
mm
Bottom Hook
Dimension a
mm
Dimension b
mm
Dimension c
mm
Recording the Product No.
Fill in the table in the right with
product's Lot No., Serial No.
(described in the product nameplate),
date of purchase and the name of the
sales shop where you purchased the
product.
* When requesting repair or ordering
a chain hoist part, please inform us of these pieces of information together.
Item
Electric chain hoist
Motorized trolley Manual trolley
Lot No.
Serial No.
Date of purchase
Name of the sales shop
Opening the Package Checking the Marks / Recording the Product No. / Recording the Initial Value
1
DANGER

Table of Contents

Other manuals for KITO ER2 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the KITO ER2 Series and is the answer not in the manual?

KITO ER2 Series Specifications

General IconGeneral
Control Voltage24V
Duty Cycle40% ED
Protection ClassIP55
Temperature Range-20°C to +40°C
TypeElectric Chain Hoist
Frequency50/60 Hz
Motor InsulationClass F
Brake TypeElectromagnetic
Load Chain GradeGrade 80
Ambient Temperature-20°C to +40°C
Power Supply3-phase
Lift Height3 to 30 meters
Chain Falls1 or 2
Voltage200-240V, 380-480V

Related product manuals