KITO ER2 Series User Manual

18
■
Operational Environment
Ambient temperature : -20°C — +40°C
Gradient of rail : No gradient in travel rail (for the hoist with trolley)
Ambient humidity : 85 % or less (no condensation)
Explosion-proof construction : Not applicable to the work environment with explosive gases or explosive vapor
Non-conforming environment : A place with organic solvent or volatile powder, and a place with a plenty of powder
and dust of general substances
: A place with considerable amount of acids and salts
NOTE
When installing the electric chain hoist outdoors or to the place where the hoist is exposed to direct rain, wind
and snow, shade the hoist with roof to protect it from rain, wind and snow.
1
Product Specication and Operational Environment
Operational Environment
Product Specification and Operational Environment (continued)
Chapter 1 Handling the Product

KITO ER2 Series Specifications

General

Control Voltage	24V
Duty Cycle	40% ED
Protection Class	IP55
Temperature Range	-20°C to +40°C
Type	Electric Chain Hoist
Frequency	50/60 Hz
Motor Insulation	Class F
Brake Type	Electromagnetic
Load Chain Grade	Grade 80
Ambient Temperature	-20°C to +40°C
Power Supply	3-phase
Lift Height	3 to 30 meters
Chain Falls	1 or 2
Voltage	200-240V, 380-480V