Kleemann GENIUS20 User Manual

117
MA06-03-1-01
Menu
[Direct access: CMD -> 7099]
Parameter
[Direct access]
Description
Default value
Value Range
I:Control cabinet
Determination of an input to start
special travel.
1.I:Spec. trav. outside
1
Definition of a first input which – if
activated - serves to initiate the special
travel. Depending on the number of
landings, further inputs follow.
not defined,
landing bus
Floor special travel
DS1
Definition of the landing for priority
travel on door side 1. If the priority
travel parameter is applied to one
landing only, the automatically per
level set IO’s can be restricted. This
way one reduces the number of inputs
on the bus module.
0
(=deactivated)
0-max.
landings
1.I:Spec. trav. outside
2
Definition of the first input, i.e.
depending on the number of landings,
there are further inputs which, if
activated, serve to initiate special
travel.
not defined, car
bus
Floor special travel
DS2
Definition of the landing for priority
travel on door side 2. If the priority
travel parameter is applied to one
landing only, the automatically per
level set IO’s can be restricted. This
way one reduces the number if inputs
on the bus module.
0
(=deactivated)
0-max.
landings

Kleemann GENIUS20 Specifications

General

Brand	Kleemann
Model	GENIUS20
Category	Controller
Language	English