Kleemann GENIUS20 User Manual

76
MA06-03-1-01
Menu
Inputs/Outputs
The Input/Output menu serves to define local input/output functions. The functions are distributed to
the shaft, the car and the control cabinet. In addition, you can define general functions and transfer
functions.
[Direct access: CMD -> 7068->OK]
Parameter
[Direct access]
Description
Default
value
Value Range
Door side 1
[CMD -> 7127 -> 7052 -
> 7120 -> 7123-> OK]
Change to page 127 to define
inputs/outputs of the shaft on door side 1.
For further information regarding this
submenu, check the corresponding
chapter.
Door side 2
[CMD -> 7128 -> 7053 -
> 7121 -> 7124-> OK]
Change to page 128 to define
inputs/outputs of the shaft on door side 2.
For further information regarding this
submenu, check the corresponding
chapter.
In car
[CMD -> 7129 -> 7131 -
> 7133 -> 7054 -> 7122
-> 7125 -> 7126 -> OK]
Change to page 129 to define
inputs/outputs of the car. For further
information regarding this submenu,
check the corresponding chapter.
General inputs
[CMD -> 7130 -> 7132 -
> 7200 -> 7201 -> 7145
-> 7212 -> OK]
Change to page 130 to define general
inputs. For further information regarding
this submenu, check the corresponding
chapter.
General outputs
[CMD -> 7146 -> 7187 -
> 7198-> 7199 -> 7202
-> OK]
Change to page 145 to define general
outputs. For further information regarding
this submenu, check the corresponding
chapter.

Kleemann GENIUS20 Specifications

General

Brand	Kleemann
Model	GENIUS20
Category	Controller
Language	English