Kleemann GENIUS20 - Setting Commands

175
MA06-03-1-01
Menu
Setting commands
[Direct access: CMD -> 7114]
Parameter
[Direct access]
Description
Default
value
Value Range
TeachIn zero point
If you call this parameter, a TeachIn is
executed and the zero point is read by
the absolute encoder.
Set stop distance up
Define the upwards stopping distance.
Set stop distance down
Define the downwards stopping
distance.
Set decel. up Vrated
Define the upwards deceleration path
for Vrated.
Set decel. down Vrated
Define the downwards deceleration
path for Vrated.
Learning travel up
Start the TeachIn travel from the
lowermost landing.
Learning travel down
Start the TeachIn travel from the
uppermost landing.