Log
The "Log" menu serves to call errors and incidents chronologically. The general section provides
information on the operation.
[Direct access: CMD -> 7148-> OK]
Error
Change to the indication of errors occurred so far.
The stored errors are displayed. The latest ones at first. You can read the short information containing
date, time and absolute encoder position. Pressing the error changes to the status display and the
state of the controller at that time is displayed (including all signals and position...). The arrows at the
bottom serve to go to the previous or next errors stored. The "Menu" button terminates the view.
To Next Page
Loading...
Need help?
General