Kleemann GENIUS20 User Manual

121
MA06-03-1-01
Menu
Parameter
[Direct access]
Description
Default value
Value
Range
closed by force. The light curtain signal will not
be factored in.
Floors fire case
[CMD -> 7143->
OK]
Change to the page to define the order of fire
case landings. For further information regarding
this submenu, check the corresponding chapter.
Fire case in group
Selection whether the fire case messages are to
be transmitted via the group log.
NO
YES/NO
O:Fire case active 1
Definition of the first output to signal the active
fire case function.
O:Fire case active 2
Definition of the second output to signal the
active fire case function.
O:Fire case active 3
Definition of the third output to signal the active
fire case function.
1.O:FC active DS1
Definition of the first output; i.e. depending on
the number of subsequent landing, there are
further outputs which serve to signal an active
fire case on door side 1.
1.O:FC active DS2
Definition of the first output; i.e. depending on
the number of subsequent landing, there are
further outputs which serve to signal an active
fire case on door side 1. (In case of selective door
control)
The "ALL" button serves to select/unselect all landings if pressed repeatedly. Change the door-opening
mask individually by pressing the landing number. Do not forget to save any changes using "OK".
[Direct access: CMD -> 7168]

Kleemann GENIUS20 Specifications

General

Brand	Kleemann
Model	GENIUS20
Category	Controller
Language	English