Kleemann GENIUS20 User Manual

128
MA06-03-1-01
Menu
Parameter
[Direct access]
Description
Default
value
Value
Range
Note: This is not supported from all inverter
types.
Evac. direction by
DCP
Query whether the load direction signal is to
be transmitted by the inverter via DCP to the
controller in order to
determine the evacuation direction.
Note: This is not supported from all inverter
types.
NO
YES/NO
Speed = v1
Selection whether the evacuation travel is to
be carried out in speed v1. When activating
the parameter by choosing YES, the other
speed options are set to NO.
NO
YES/NO
Speed = v2
Selection whether the evacuation travel is to
be carried out in speed v2. When activating
the parameter by choosing YES, the other
speed options are set to NO.
NO
YES/NO
Speed = v3
Selection whether the evacuation travel is to
be carried out in speed v3. When activating
the parameter by choosing YES, the other
speed options are set to NO.
NO
YES/NO
Speed = vrated
Selection whether the evacuation travel is to
be carried out in vrated. When activating the
parameter by choosing YES, the other speed
options are set to NO.
NO
YES/NO

Kleemann GENIUS20 Specifications

General

Brand	Kleemann
Model	GENIUS20
Category	Controller
Language	English