Parameter
[Direct access]
Definition of an input to activate the visitor
mode. When the input is activated, the car
travels to the main floor.
YES causes the lift to start in entry landing only
in the case of a detected “load” within the car.
Otherwise the lift will not move.
If the visitor control is activated, the lift moves
into the entry landing where the car call for the
visitor landing can be set automatically.
When the lift is approaching the entry landing, it
is reserved to visitor travel for this maximum
time interval (in seconds).
Definition of an input for Penthouse landing call
with zero load consideration
To Next Page
Loading...
Need help?
General