EasyManuals Logo

Kleemann GENIUS20 User Manual

Default Icon
233 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
151
MA06-03-1-01
Menu
Accesses shaded in green are equipped with pawl devices. Accesses with grey font which are not
shaded in green do exist, but don’t have hinged doors. Accesses marked in red are not enabled in the
access masks.
The “ALL” button serves to select all landings or no landings if you press the button again. Change the
access individually by pressing the landing number. Do not forget to save any changes using “OK”.
[Direct access: CMD -> 7218]
I:Pressure compensation
Definition of an input for maintaining a
minimum pressure in the master cylinder
after touchdown of the car.
Dst for PD operation (mm)
Definition of the distance from the center
of the landing at which the car is to stop
when extending the bolts.
25
20-45 mm
Tolerance(mm)
Tolerance for the above described distance
from the center of the landing.
5
2-25 mm
Non stop travel in up. dir.
Query whether the car is allowed to start
travelling in upwards direction with
extended holding bolts in order to be able
to retract the latter during travel without
stopping for this purpose.
NO
YES/NO
t:delay for retraction(ms)
Delay time which must pass before
enquiring whether the holding bolts are
retracted when travelling in upwards
direction without a stop.
3000
0-9000 ms

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kleemann GENIUS20 and is the answer not in the manual?

Kleemann GENIUS20 Specifications

General IconGeneral
BrandKleemann
ModelGENIUS20
CategoryController
LanguageEnglish