KOMPATTO KH0623 - Default Chapter; Table of Contents

2
Dear Customer,
Thank you for purchasing one of our products.
This oven is part of a series of electrical equipment designed for the food sector. Our ovens are
easy to use, ergonomic and enable cooking control, while boasting a pleasant and modern design.
Contents
5. Recipe menu 29
5.1. How to navigate through the recipe
menu 29
6. Service menu 30
6.1. Self-cleaning 30
6.2. Boiler descaling 31
6.3. Date and time 32
6.4. Cooking chamber lighting 32
6.5. System info 33
6.6. Language 33
6.7. Advanced services 34
6.8. HACCP recording 34
6.9. Import/Export recipes 34
7. Maintenance 35
7.1. Cleaning 35
7.2 Technical compartment ventilation
lter 35
7.3. Moisture drain 36
7.4. Cleaning glass 36
7.5 Door adjustment 36
8. Control and safety devices 37
8.1. Door magnetic microswitch 37
8.2. Motor thermal breaker 37
8.3. Cooking chamber safety thermostat
37
9. Troubleshooting 38
9.1. Common problems 38
9.2. Checks(forqualiedtechnician) 39
9.3. Parts management 40
10. Alarms description 41
11. Technical Data Sheets 42
11.1. KH0623 - KT0623 42
11.2. KH061 - KT061 43
11.3. KH101 - KT101 44
12. Wiring diagrams 45
12.1. KH0623 45
12.2 KH061 46
12.3. KH101 47
12.4. KT0623 48
12.5. KT061 49
12.6. KT101 50
1. Installation 3
1.1. General safety warnings 3
1.2. Positioning 4
1.3. Water connection 5
1.4. Drain pipe connection 6
1.5. Wiring 7
1.6. Oven commissioning and testing 9
2. Instructions for use 10
2.1. Identicationsofcontrols 10
2.2. Preliminary information 11
2.3.1 Main menu of ovens with boiler 13
2.3.2 Main menu of ovens without boiler 13
3. Manual setup 13
3.1. Cooking mode selection 13
3.2. Setting the temperature and the
automatic pre-heating cycle of the
oven 15
3.3. Time settting 16
3.4. Fan setup 17
3.5. Throttle valve 17
3.6. Manual moisturising 17
3.7. Moisture setup 18
3.8. Steam tuner function 18
3.9. CoookingwithcoreprobeandΔT 19
Positioning the core probe 19
 UsingΔTcookingmodes 19
3.10. Cooking with Rack Control 20
3.11. Maintenance 21
3.12. Automatic cooling 22
3.13. Manual cooling 23
3.14. Programming a recipe with several
cooking phases 24
3.15. Memorizing and managing the
recipes 24
4. Regeneration program 26
4.1. Preliminary information 26
4.2. Setting the timed regeneration 26
4.3. Set the regeneration with probe at
the core 27
4.4. Special regeneration functions 27
4.5. Save, edit, delete a regeneration
program 28