7. Maintenance
7.2. Technical compartment ventilation lter
8.1. Door micro switch
The door microswitch is the device which stops the cooking cycle of the oven when the door is
opened.
Once te door is closed, the regular cycle is resumed.
Do not operate this device manually with the oven door open.
8.2. Motor thermal breaker
The fan motor is equipped with a built-in thermal protection which stops operation in case of
overheating.
The motor restarts automatically as soon as its temperature is lowered, returning within the
safety range.
8.3 Safety thermostat of the cooking chamber
If the temperature in the cooking chamber reaches 350 ° C, the thermostat disconnects the
power supply to the heating elements of the oven.
Thissafetydevicecanberesetonlybyaqualiedsupportservicetechnicianbecauseitrequires
further checks.
8. Control and safety devices
b
g. 65
g. 64
63 page 36 and g. 64 page 37).
To adjust the tightness of the door, if nec-
essary, loosen the bolts (ref. a-b g. 63
page 36 and g. 64 page 37)and move
the door in the desired position (g. 65).
After the adjustment, tighten the bolts
again.
To Next Page
Loading...