Konica Minolta CS-3000HDR User Manual

30
Setting
4-c-6. Press either or key to select [OFF]
or [ONE] / [TWO].
*
[TWO] can only be selected with CS-3000HDR.
If the “OVER” error message appears when
set to [OFF], set IN-ND to [ONE] or [TWO].
MENU
MEAS
MANUAL
INTEG TIME
IN - N D OFF
000500.000 m s
SPEED MODE
(
2/2
)
MENU
MEAS
MANUAL
INTEG TIME
IN - N D O FF
000500.000
m s
SPEED MODE
(
2/2
)
MENU
MEAS
MANUAL
INTEG TIME
IN - N D TWO
000500.000 m s
SPEED MODE
(
2/2
)
MENU
MEAS
SPEED MODE
(
2/2
)
MULTI-NORMAL
MULTI-FAST
MANUAL
4-c-4. Repeat the procedures of 4-a-2. and
-3. for the required number of digits.
4-c-5. Press
ENTER
key.
The cursor moves to the IN-ND item.
This screen is used to determine whether the
ND filter built into the main unit is used or not.
4-c-7. Press
ENTER
key.
When the setting is confirmed, the MENU - MEAS
- SPEED MODE screen appears again on the LCD.
5. Press
ESC
key.
When the measurement speed is set, the MENU -
MEAS screen appears again on the LCD.
6. Press
ESC
key.
The MENU screen appears again on the LCD.
7. Press
ESC
key.
The MEAS screen appears again on the LCD.
4-c-3. Press either or key to move the
cursor.
MEAS SNGL
UC00
SPD
Mnl
CMF
2 ˚
SYN
[
Hz
]
59.94
ACC
Non
cd
m
2
Lv 49. 66
0 . 4045
0 . 4088
x
y
1 ˚

Konica Minolta CS-3000HDR Specifications

General

Brand	Konica Minolta
Model	CS-3000HDR
Category	Measuring Instruments
Language	English