Konica Minolta CS-3000HDR - Page 76

74
Measurement
Operating Procedure
Follow the procedure below to display the memory data properties (measurement conditions).
1
. Press
MENU
key when the MEAS screen
is displayed.
The MENU screen appears on the LCD.
When the backlight of the LCD has been turned off
via
BACKLIGHT
key on the MEAS screen, the
backlight is turned on.
MEAS SNGL
UC00
SPD
Nrm
CMF
2 ˚
SYN
[
Hz
]
59.94
ACC
Non
cd
m
2
Lv 55.91
0 . 4043
0 . 4073
x
y
1 ˚
MEAS
MEMORY
OPTION
SETUP
DARK MEASUREMENT
INFORMATION
MENU
2
. Press either or key to select
[MEMORY] and then press
ENTER
key.
The MENU - MEMORY screen appears on the LCD.
MENU
MEMORY
DELETE
PROPERTIES
3
. Press either or key to select
[PROPERTIES] and then press
ENTER
key.
The MENU - MEMORY - PROPERTIES
(for confirming memory data measurement
conditions) screen appears on the LCD.
The memory data number 00 is displayed.
MEMORY 00
DATE 2021/08/26
11:12:56
SPEED
MANUAL
INTEG TIME
77.038ms
IN-ND
OFF
MENU
MEMORY
PROPERTIES
(
1/3
)
1
5, 6, 7
2, 3, 4