500 SERIES INSTALLATION MANUAL JULY 2016PAGE 26
5.5 Grease the splined end yoke shaft (10-365).
5.6 Grease one end of the engagement pin (10-494) (see
Figure 5G). Insert greased end into the end of the splined
end yoke shaft (see Figure 5H). Three quarters (3/4) of
the engagement pin should remain beyond the end of the
splined end yoke shaft.
Step 5: Stern Drive Installation (continued)
FIGURE 5G
FIGURE 5H
FIGURE 5F
To Next Page
Loading...
