Kopp Labormaster HCT 3000 - Page 20

Step 1:
Presetting the parameters sealing temperature, sealing time,
sealing pressure, dwell time and take-off speed.
Working principle
3.1.1.
via touch of a button.
Operating instructions and technical description
Seal seam strength tester Labormaster HCT 3000
Page - 20 -
Step 3: Start the hot tack or cold tack measurement
Step 2: Insert the material to be tested.
...and comparing several curves.
Get reliable test results quickly and easily!
Step 5: Storage, documentation, further
processing.
Step 4: Automatic visualization of the seal seam strength as
a curve…
Fax +49.7153.9510-100
Packaging systems
Step 2 and 3
Step 4
Phone +49.7153.9510-0
Willi Kopp e. K
http://www.kopp-online.de
D-73262 Reichenbach/Fils
Step 5
E-Mail: sales@kopp-online.de
Ulmer Straße 51 – 53
Step 4
Step 1
Inh. Ludwig P. Goals
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 20 of 82, March 1, 2016
Machine Translated by Google