Kopp Labormaster HCT 3000 User Manual

Picture:
In this way, interference can be filtered out.
F2: Temperaturalarm
F2: Startup options
F6: Language
Factory setting: The tensile
force threshold is factory set to 1.5 N.
F6: Offset
Overwrite the value with the number keys. Confirm your
choice with the ENTER key.
Page - 52 -
Use the ÿ/ÿ arrow key to select the desired language and confirm
with the ENTER key.
The cursor (highlighted in blue) is on the selection menu.
F1: Main menu
The recording of the measured values only begins when the tearing force rises above the set threshold
value.
F1: Main menu
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
Use the TAB key to move the cursor (highlighted in blue) to the tensile
force threshold value that you want to change.
- Language with F2
5.3.20.3.2. Set the tensile force threshold
- Temperature alarm with F6
- Offset mit F2
- Start options with F6
You can access the screen for setting the threshold values on the supervisor level
5.3.21. Select menu language
You can reach the screen for setting the language in the supervisor level from the picture:
Figure 25 / Menu language
E-Mail: sales@kopp-online.de
http://www.kopp-online.de
D-73262 Reichenbach/Fils
Ulmer Straße 51 – 53
Willi Kopp e. K
Phone +49.7153.9510-0
Packaging systems
Fax +49.7153.9510-100
Inh. Ludwig P. Goals
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 52 of 82, March 1, 2016
Machine Translated by Google

Kopp Labormaster HCT 3000 Specifications

General

Brand	Kopp
Model	Labormaster HCT 3000
Category	Laboratory Equipment
Language	English