Kopp Labormaster HCT 3000 User Manual

Fax +49.7153.9510-100
E-Mail: sales@kopp-online.de
Inh. Ludwig P. Goals
Phone +49.7153.9510-0
Packaging systems
D-73262 Reichenbach/Fils
Willi Kopp e. K
http://www.kopp-online.de
Ulmer Straße 51 – 53
2.Safety instructions
• Do not bend, squeeze or pull the connecting cable. Do not let the connecting cable hang
over the surface of the device. Protect the connecting cable from sharp edges, oil and heat.
functional protective devices permitted.
• The device, especially the sealing rails, become hot during operation. It exists
device housing to avoid damage or electric shock. Maintenance and repair work may only
be carried out by qualified personnel.
• Lay the connecting cable so that it does not become a tripping hazard.
• Do not use in damp or wet rooms!
be sufficiently long.
Page 10 -
• If the device does not function properly, immediately unplug the device and have the
device checked by maintenance personnel before using it again.
• Never leave the device unattended during operation!
• The device must not be operated without finger protection! Danger of
crushing and burns!
• Work with the device is only possible with the panels and panels in place
• The warning stickers on the machine must not be removed! If warning stickers are lost, original
stickers should be reordered.
• Never open the housing of the device or force objects into it
Seal seam strength tester Labormaster HCT 3000
Mains voltage matches.
Operating instructions and technical description
Danger of burns! Therefore, make sure that no one touches the hot parts or sealing rails of
the device during use and during the cooling phase.
to be used.
• The device may only be used for the intended purpose
• Do not store the device while it is still hot and do not cover the device.
• For bags filled with liquids, the bag protrusion must be above the filling level
• If liquids or other objects get into the device, immediately unplug the device and have the
device checked by maintenance personnel before using it again.
• For trained personnel only - Keep the device away from children.
When unplugging the power cord, always pull on the plug, never on the cord
• Check whether the voltage stated on the nameplate corresponds to your local voltage
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 10 of 82, March 1, 2016
2.1. General safety instructions
Machine Translated by Google

Kopp Labormaster HCT 3000 Specifications

General

Brand	Kopp
Model	Labormaster HCT 3000
Category	Laboratory Equipment
Language	English