9. EC declaration of conformity
E-Mail: sales@kopp-online.de
Ulmer Straße 51 – 53
Willi Kopp e. K
Packaging systems
D-73262 Reichenbach/Fils
Phone +49.7153.9510-0
http://www.kopp-online.de
Inh. Ludwig P. Goals
Fax +49.7153.9510-100
Labormaster HCT 3000 with integrated laboratory sealing device
harmonized
LM HCT 3000
In accordance with the EC Machinery Directive 2006/42/EC, Annex II A
EN 61000-6-1, EN 61 000-6-3
.......................................................
Low Voltage Directive 2006/95/EC
Device no.:
If the device is modified without our consent, this declaration will no longer be valid.
Page - 82 -
For address see company address
Operating instructions and technical description
Standards1) in particular:
EC declaration of conformity
Name of the machine: .......................................... .........
Design as well as the version we market, the relevant basic ones
331116
Applied
03/01/2016 Götz Goller…………………………
Machine type:
the EMC Directive 2004/108/EC and the
.......................................................
Information about the signatory: authorized documentation officer
We hereby declare that the device described below is based on your design and
.......................................................
Complies with the safety and health requirements of the above-mentioned EC directives.
Seal seam strength tester Labormaster HCT 3000
.......................................................
Date, signature:
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 82 of 82, March 1, 2016
Subject to errors and technical changes!
Machine Translated by Google
To Previous Page
Loading...
Need help?
General