The measurement data can be saved either in the internal Compact Flash or on an external
USB memory (USB stick). The “File Functions” screen shows at the top which memory is currently
being used for saving.
If a USB storage device is connected, the file browser automatically switches to the USB storage
device and shows its contents. In order to switch back to the Compact Flash, the connection to the
USB storage must be disconnected.
Use the connected keyboard to enter the text. Complete your entry with the ENTER key and save
your entry with F4
To back up data from the Compact Flash to USB storage, use “Data backup” (see page 48)
5.3.16. Measurement data acquisition
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
Note: We strongly recommend not storing any files in the root directory (lowest level) of the
Compact Flash. First create a subdirectory!
Page - 42 -
A good folder structure makes it easier to save or transfer files later.
Figure 19 / Experiment description
Packaging systems
http://www.kopp-online.de
D-73262 Reichenbach/Fils
Inh. Ludwig P. Goals
Phone +49.7153.9510-0
Fax +49.7153.9510-100
Ulmer Straße 51 – 53
Willi Kopp e. K
E-Mail: sales@kopp-online.de
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 42 of 82, March 1, 2016
Subject to errors and technical changes!
Machine Translated by Google
To Next Page
Loading...
Need help?
General