Clean the heated sealing bars with a soft cotton or linen cloth. If necessary, repeat if heavily soiled.
Attention: Avoid exerting strong pressure on the display!
Clean filter water separator pressure control valve
Use warm water and household detergent to clean all plastic parts.
Never use harsh cleaning agents or hard objects.
Never use harsh cleaning agents or hard objects.
Clean the display and control panel regularly with a soft cloth.
The condensate level must never rise above the maximum mark.
A notice:
Page - 59 -
6.1.4.
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
6.1.2. Cleaning the TFT display
The sealing rails are still hot even after switching off or unplugging!
Wearing safety gloves.
Attention:
Risk of fire and burns when cleaning the sealing rails.
6.1.3. Cleaning the sealing rails
6.1.4.1. Drain condensate
Depending on the level of condensate in the container, drain condensate
regularly (daily if necessary). Pressing the plastic part against the container
opens the valve.
Fax +49.7153.9510-100
E-Mail: sales@kopp-online.de
Ulmer Straße 51 – 53
Willi Kopp e. K
Figure 31/
D-73262 Reichenbach/Fils
Packaging systems
http://www.kopp-online.de
Condensate tank
Phone +49.7153.9510-0
Inh. Ludwig P. Goals
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 59 of 82, March 1, 2016
Machine Translated by Google
To Next Page
Loading...
Need help?
General