Kopp Labormaster HCT 3000 User Manual

- Language with F6
You can access the screen for setting times and offsets on the supervisor level
5.3.21.2. Setting date and time
,
F2: Offset
You can access the screen for setting times and offsets on the supervisor level
Picture:
F2: Language
Page - 54 -
Confirm your choice with the enter key (ENTER)
Overwrite the value using the number keys
to save your changes and make them take
effect. Press the F4 key.
Note: Changes should only be made by technicians or experienced users!
F6: Date/Time
Seal seam strength tester Labormaster HCT 3000
F4: Confirm entry
Operating instructions and technical description
F1: Back to main menu
Use the TAB key to move the cursor (highlighted in blue) to
the delay offset value you want to change.
5.3.21.1.2. Offset for the delay
Overwrite the value with the number keys. Confirm
your choice with the ENTER key.
- Offset with F6
Use the TAB key to move the cursor (highlighted in blue) to
the time value you want to change.
- Date/time with F2
Picture:
F1: Main menu
Q6: Options
- Options with F2
D-73262 Reichenbach/Fils
E-Mail: sales@kopp-online.de
Willi Kopp e. K
http://www.kopp-online.de
Phone +49.7153.9510-0
Inh. Ludwig P. Goals
Packaging systems
Fax +49.7153.9510-100
Figure 27 / Date Time
Ulmer Straße 51 – 53
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 54 of 82, March 1, 2016
Subject to errors and technical changes!
Machine Translated by Google

Kopp Labormaster HCT 3000 Specifications

General

Brand	Kopp
Model	Labormaster HCT 3000
Category	Laboratory Equipment
Language	English