Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 8 of 82, March 1, 2016
Subject to errors and technical changes!
1.2. scope of delivery
1.3. General information
Under no circumstances should you throw away the packaging before you have checked and put the device
and accessories into operation.
- PC keyboard with USB port
The operating instructions are part of the device and must be kept with the device throughout its entire operating life. The
device may only be passed on with operating instructions.
The operator must ensure that the device is used exclusively for its intended purpose.
- Control cabinet key
Page 8 -
Everyone who has anything to do with the device, whether using the device, maintaining or overhauling the device, must
have read the operating instructions.
- Sealing seam strength tester LABORMASTER HCT 3000 with integrated
laboratory sealing device SGPE 3000
Please check the shipment immediately! If you discover any transport damage, this must be reported to the freight
forwarder immediately. It is essential to keep the packaging, regardless of whether it is damaged or not.
Seal seam strength tester Labormaster HCT 3000
- Hexagonal Allen key SW4 angled
Operating instructions and technical description
Care must be taken to ensure that the contents of the instructions are not partially or completely damaged.
- These operating instructions with EC declaration of conformity
- Silicone rubber 18 mm x 1 mm, flat, l = 250 mm
The operating instructions must be read carefully before commissioning!
- SW3 hexagonal key wrench with T-handle
1.3.1. About these operating instructions
- Hex key SW3 angled
Phone +49.7153.9510-0
Packaging systems
http://www.kopp-online.de
D-73262 Reichenbach/Fils
Ulmer Straße 51 – 53
Willi Kopp e. K
E-Mail: sales@kopp-online.de
Fax +49.7153.9510-100
Inh. Ludwig P. Goals
Machine Translated by Google
To Next Page
Loading...
Need help?
General