3.2. Available accessories
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 22 of 82, March 1, 2016
3.2.2.
Mobile equipment trolley with four lockable swivel castors.
Sample cutter
For quickly and easily cutting out test strips for seal seam strength testing. Two
parallel cutting blades 45 mm apart (alternatively 15 mm or 25 mm).
Item no.: 1-9150100002
Page - 22 -
With DATAVIS, characteristic curves for seal seam strength (hottack and coldtack) are
visualized. DATAVIS is the quick way from recording measurement data to a visually
appealing and clear representation of the force/time curves. DATAVIS displays the
individual values recorded by the Labormaster 3000 in the form of a force/time curve.
Item no.: 1-9152100010
3.2.1. Mobile equipment table
3.2.3.
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
Laying and feeding table
Item no.: 1-9150100001
Item no.: 1-9152000002
Support surface for sealing material, flat to the seal contact surface.
3.2.4. DATAVIS Softwaretool
Includes cutting mat.
E-Mail: sales@kopp-online.de
Figure 8 / Sample cutter (accessories)
Fax +49.7153.9510-100
Figure 7 / Clip-on table (accessories)
Inh. Ludwig P. Goals
Figure 6 / Equipment trolley (accessories)
Figure 9 / Datavis (accessories)
Phone +49.7153.9510-0
Packaging systems
D-73262 Reichenbach/Fils
http://www.kopp-online.de
Willi Kopp e. K
Ulmer Straße 51 – 53
Machine Translated by Google
To Next Page
Loading...
Need help?
General