Picture:
Note: Changes should only be made by technicians or experienced users!
F2: Language
F6: Date/Time
The sealing time offset compensates for delays caused by the pneumatics or mechanics of the device or
by the sealing medium. The comparison is carried out using real-time measurement of the
control.
Overwrite the value with the number keys. Confirm
your choice with the ENTER key.
5.3.21.1. Set offset
5.3.21.1.1. Offset for the sealing time
F1: Back to main menu
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
Use the TAB key to move the cursor (highlighted in blue) to the
sealing time offset value you want to change.
- Date/time with F2
Page - 53 -
- Language with F6
You can access the screen for setting times and offsets on the supervisor level
E-Mail: sales@kopp-online.de
Ulmer Straße 51 – 53
Figure 26 / Offset
D-73262 Reichenbach/Fils
Willi Kopp e. K
Phone +49.7153.9510-0
http://www.kopp-online.de
Packaging systems
Fax +49.7153.9510-100
Inh. Ludwig P. Goals
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 53 of 82, March 1, 2016
Subject to errors and technical changes!
Machine Translated by Google
To Next Page
Loading...
Need help?
General