EasyManuals Logo

Kopp Labormaster HCT 3000 User Manual

Kopp Labormaster HCT 3000
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
4.1. Installation location
3.4. Intended Use
4.2. Climatic conditions during operation
3.5. Prohibited applications
Inh. Ludwig P. Goals
E-Mail: sales@kopp-online.de
Ulmer Straße 51 53
http://www.kopp-online.de
D-73262 Reichenbach/Fils
Willi Kopp e. K
Phone +49.7153.9510-0
Packaging systems
Fax +49.7153.9510-100
The device is marketed as a technical work tool and is intended for use at work only by trained persons aged 14 years and
over.
and visualization is designed for measuring seal seam strengths (warm and cold seam strength, hot and
cold tack) in research, development and quality control.
Packaging material whose processing violates the law or morality
Never use the device in damp or wet rooms!
Storage/transport: 10
Relative humidity
Suitable for heat-sealable, flexible packaging such as films, film composites, laminates, packaging papers, etc.
as well as for testing sealing waxes, coatings, printing inks and much more
... 90% (non-condensing)
explosive substances
Page - 25 -
+ 30 °C
Operation: 15
Storage/transport: 0 ... + 60 °C
...
The LABORMASTER 3000 with integrated laboratory sealing device SGPE 3000 with measurement data acquisition
Packaging of aggressive, toxic, infectious substances. Packaging of
living things
80% (non-condensing)
Seal seam strength tester Labormaster HCT 3000
...
Operating instructions and technical description
Packaging of dangerous substances, especially flammable, easily flammable,
Use in potentially explosive or (dangerously) dusty zones Use in damp or wet rooms
Temperature
Operation: 30
Can also be used as a pure sealing device, without tensile testing. Furthermore, tensile strength tests can also be carried
out on all suitable materials without a sealing process.
Place the device in a ventilated, well-lit place. Avoid direct sunlight, extreme temperatures, moisture, dirt
and sand. The device must not be exposed to mechanical shocks or vibrations.
4.Commissioning
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 25 of 82, March 1, 2016
Subject to errors and technical changes!
Machine Translated by Google

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kopp Labormaster HCT 3000 and is the answer not in the manual?

Kopp Labormaster HCT 3000 Specifications

General IconGeneral
BrandKopp
ModelLabormaster HCT 3000
CategoryLaboratory Equipment
LanguageEnglish