Experiment descriptions can be saved in BMP format as a screenshot (screen print).
5.3.14. Result display The result
display always refers to the currently selected curve.
For more information, see page 46 "Save curve function as a screenshot (screen printout)"
The current curves, the most important sealing parameters and results as well as the
However, the curve should previously have been saved in CSV format or at least given a file name. If this is not the case,
the screen printout stops and switches to the file manager. Here you can then assign a name. You then have
to trigger the screen printout again (curve view key F3)
Page - 40 -
.
become. To do this, press the F3 key
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
Ulmer Straße 51 – 53
D-73262 Reichenbach/Fils
Packaging systems
E-Mail: sales@kopp-online.de
Phone +49.7153.9510-0
http://www.kopp-online.de
Inh. Ludwig P. Goals
Fax +49.7153.9510-100
Figure 18 / Results display
Willi Kopp e. K
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 40 of 82, March 1, 2016
Subject to errors and technical changes!
Machine Translated by Google
To Next Page
Loading...
Need help?
General