You can switch the display to other curves at the current cursor position:
To delete all displayed curves, enter “0” and confirm with the ENTER key.
Select the curve (measurement data) to be saved as described above.
Press F4 to delete all curves
Simply select the appropriate curve as described above.
Page - 39 -
Press F4 to delete the curves
5.3.13. Save screen display
Press the Print Screen key on the keyboard. A bitmap of the screen is stored in the current active memory
directory. The file name “screenshot.bmp” is assigned automatically by the system.
Using the cursor keys cursor left and cursor right, you can move along the curve with a display mark. In the curve view,
the current cursor position on the x-axis [ms] and the associated force value [N] (y-value) are displayed at the bottom.
5.3.11. Delete all curves/measurement data
Remember to rename the file to archive it. If the Print Screen button is pressed again, the existing file will be
overwritten with the new screen view!
Seal seam strength tester Labormaster HCT 3000
Attention: If you delete or overwrite a curve, the measurement data is also saved
Operating instructions and technical description
Press the F5 key
Select the curve (measurement data) to delete as described above.
5.3.9. Cursor function
irretrievably lost unless you have previously saved it.
and go to “File functions” p. 43
In this way, curve data can be compared with each other.
5.3.12. Save curve/measurement data
5.3.10. Delete curve/measurement data
Ulmer Straße 51 – 53
E-Mail: sales@kopp-online.de
Fax +49.7153.9510-100
Inh. Ludwig P. Goals
Phone +49.7153.9510-0
Packaging systems
D-73262 Reichenbach/Fils
Willi Kopp e. K
http://www.kopp-online.de
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 39 of 82, March 1, 2016
Machine Translated by Google
To Next Page
Loading...
Need help?
General