Kopp Labormaster HCT 3000 User Manual

Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 33 of 82, March 1, 2016
5.3. Menu navigation and parameter settings
Sealing force display (optional)
You reach the level for setting and monitoring the test parameters starting from
main menu
Main menu above
Curve display
Dwell time:
Take-off speed: Setting
5.3.1. Set hot/cold tack test parameters
main menu
F6:
Curve display
Page - 33 -
Monitoring of the actual value and display of the maximum value of the current/last sealing
force: sealing
Seal seam strength tester Labormaster HCT 3000
Setting target temperature and monitoring actual temperature.
Temperature below:
Sealing time: Setting Setting target value
and monitoring actual value
Operating instructions and technical description
.
Top temperature:
setting target temperature and monitoring actual temperature
Q1:
All important test-specific parameters can be monitored and most of them can be set here:
F1 - experimental parameters
or via the curve display view F2
Fax +49.7153.9510-100
Phone +49.7153.9510-0
Inh. Ludwig P. Goals
Packaging systems
D-73262 Reichenbach/Fils
Willi Kopp e. K
http://www.kopp-online.de
Ulmer Straße 51 – 53
Figure 16 / Parameter setting
E-Mail: sales@kopp-online.de
Machine Translated by Google

Kopp Labormaster HCT 3000 Specifications

General

Brand	Kopp
Model	Labormaster HCT 3000
Category	Laboratory Equipment
Language	English