The symbols used in these operating instructions are primarily intended to draw attention to
the safety instructions!
Wearing safety gloves!
Warning of hand injuries!
When unplugging the power cord, always pull on the plug, never on the cord!
Page - 9 -
The most important goal of the safety instructions is to prevent personal injury. The symbol used
cannot replace the text of the safety notice. The text must therefore always be read in its entirety!
Warning of hot surfaces!
1.3.2. Symbol
Pull out the power plug!
Danger high voltage!
Warning of a danger zone!
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
Willi Kopp e. K
Ulmer Straße 51 – 53
D-73262 Reichenbach/Fils
Phone +49.7153.9510-0 Fax
+49.7153.9510-100
Packaging systems
owner Ludwig P. Goller
Subject to errors and technical changes!
E-Mail: sales@kopp-online.de
http://www.kopp-online.de
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 9 of 82, March 1, 2016
Machine Translated by Google
To Next Page
Loading...
Need help?
General