Kopp Labormaster HCT 3000 - Seal Seam Strength Tester Labormaster HCT 3000; Wear Parts List; Factory Calibration; Wear and Spare Parts

Inh. Ludwig P. Goals
Phone +49.7153.9510-0
Willi Kopp e. K
Fax +49.7153.9510-100
Packaging systems
E-Mail: sales@kopp-online.de
http://www.kopp-online.de
D-73262 Reichenbach/Fils
Ulmer Straße 51 – 53
7.2.
7.1.
Wear parts list
Spare part list
1021.03.62
Pressure transmitter with force transducer
2
The Labormaster 3000 can then be recalibrated by the manufacturer's service technicians on site at the customer's site.
Please contact the service department of the manufacturer's factory.
Please specify jaw length!
2
2
Quick exhaust valve
Page - 64 -
1-8530060521
The device does not require any special wearing parts.
Throttle check valve
1
24 VDC relay
1-2120413002
1-2719002401
built-in
1
1-2111012001
1
Electronic relay (heating load relay)
Power supply, primary clocked
1
2
Item name
1
1021.05.012
1058.06.7
1-3632120003
1
1-6516130301
Lithium-Batterie
Cover cap
1058.11.02.2
number of pieces
1
1-3112000001
1-3600050004
Air cylinder (sealing)
1058.11.02.7
Electronic gear motor
2
1-2402240001
Article no.
1
1021.18.01.14
1-3600040001
Temperature sensor Ø 4 x 32 mm Fe-CuNi leaf
spring (temperature sensor holder)
6.6. Factory calibration The Labormaster
HCT 3000 with integrated laboratory sealing device offers the option of factory calibration of the sealing force,
sealing temperatures and force (sealing seam strength).
1058.06.60
number
Operating instructions and technical description
1
1-3940000001
1058.11.02.020
When ordering wear and spare parts, be sure to state the serial number (see nameplate)!
Swivel drive
Foot pressure switch
1
2
drawing
1-2113031001
Mains disconnection device (main switch)
1021.03.02.52
1058.07.13
Heating cartridge for 100 mm sealing jaws
The certification period depends on the user’s audit cycle.
2
2
Proximity switch zero point pinch roller
Sensor holder
2x3/2-way solenoid valve
1024.07.5
1058.06.59
1-2995000001
2
1058.11.02.36
Seal seam strength tester Labormaster HCT 3000
1-2565300001
proximity switch
1
1-3804000001
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 64 of 82, March 1, 2016
7. Wear and spare parts
Machine Translated by Google