3.3. Technical data
* The measurement uncertainty is given as the comparison standard
deviation sR with a confidence probability of 68%.
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 23 of 82, March 1, 2016
D-73262 Reichenbach/Fils
Willi Kopp e. K
http://www.kopp-online.de
Ulmer Straße 51 – 53
E-Mail: sales@kopp-online.de
Fax +49.7153.9510-100
Inh. Ludwig P. Goals
Phone +49.7153.9510-0
Packaging systems
3.3.1.
Page - 23 -
Technical data table
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
0,1 …
Adjustable alarm limits
15 to 60mm
Seal printing
Tensile force measurement
approx. 6 bar, 1.2 NL/stroke
0.2 ... 99.99 s Dwell time tolerance: < ± 0.1s PLC controlled.
PLC controlled.
Dwell time
Top length:
TFT color display 5.7" / QVGA
Electrical connection
Indication on the display.
Recording thickness:
1.5 N to 200N Max. tolerance: < ÿ 1.5% of full scale
sealing temperature
Resolution 0.1°C
110 mm
Trigger
speed
Adjustable via control panel
Sealing contact surface
ÿ
max. 60,0 mm
max. 0,5 mm
Adjustable via control panel.
Adjustable via control panel
Sealing power
Tensile force measuring range
2 x USB; 1 x Ethernet
Tare adjustment takes place automatically
(e.g. when changing rails)
and is defined by the sealing force and
sealing contact area (N/cm²)
Four times that of commonly used ones
Sampling rate: 1000 Hz
The emission sound pressure level at the workplace for the documented load case was determined based
on: DIN EN ISO 11204; Accuracy class 2
Compressed air
Seam
separation speed
Display
Real-time measurement with display
Clamping device
Sample dimensions
0,2 bis12 m/min.
...
Real-time measurement with display
depending on the rail equipment and sample
width
Strip width of 15 mm increases the
Piezoelectric quartz sensor.
Device dimensions approx. L 1540 x W 700 x H 650 mm
C Max. tolerance: < ± 0.2%
0.2 ... 99.99 s Sealing time tolerance: < ± 0.1 s
65 mm
Measurement uncertainty*: ± 2.5 dB
Totally on the entire seal area.
Recording width:
Width:
6 m/min. half trigger speed
Learning emission
from full scale value [300 °C]
60 ...1800 N Max. tolerance: < ÿ 1.5% of full scale
value
Seal strength
230 Volts / 50 Hz, 1300 Watts
300
Meaning of the average value
PLC controlled.
Net weight
approx. 132 kg; gross approx. 150 kg
PLC controlled. Target value setting on the
control panel. Display shows target and
actual values. Each sealing rail can be
regulated separately.
Seal time
Length below:
The workplace level is: LpA = 68.0 dB
Interfaces
All information on this page is approximate.
Machine Translated by Google
To Next Page
Loading...
Need help?
General