Kopp Labormaster HCT 3000 User Manual

call the file functions. Move that
Renaming files should be done with the utmost care. When you rename files, they must
not be given other file extensions. Otherwise the files will become unusable. If you
rename files, the relationship between the CSV and BMP files is lost.
You can delete curve files that have already been saved.
(A recursive deletion of subfolders/files would have to be programmed manually and will only be
implemented in later versions due to time constraints).
Deleted curves/measurement data are irretrievably lost.
Enter the file functions. Use the TAB key to move the cursor (highlighted in blue) to the “Folder” screen
area and then use the arrow keys ÿ/ÿ to the desired folder.
If you still want to rename files, use the TAB key
to move the cursor (highlighted in blue) to the “Folder” screen area and then use the ÿ/ÿ arrow
keys to select the desired folder. Confirm your selection with the ENTER key.
Important:
A file name must always be assigned!
5.3.17.7. Rename file function
Deleted curves/measurement data are irretrievably lost.
A notice:
Condition: A file/directory must be selected with Enter. The folder must be empty.
A notice:
5.3.17.8. Delete file function
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
Be sure to confirm the name you entered with ENTER before saving.
,
Page - 47 -
Important!
Then press F6
"Delete file".
Use the TAB key to move the cursor (highlighted in blue) to the “Files” screen area and then use the
arrow keys ÿ/ÿ to the desired file. Confirm your selection with the ENTER key. The name of
the file appears in the Edit field. Assign a new file name. To do this, use the connected PC
keyboard. Confirm the new file name with the ENTER key.
Confirm your selection with the ENTER key.
Be sure to confirm the curve file selected for deletion with ENTER.
Use the TAB key to move the cursor (highlighted in blue) to the “Files” screen area and then use the
arrow keys ÿ/ÿ to the desired file. Confirm your selection with the ENTER key.
Fax +49.7153.9510-100
Inh. Ludwig P. Goals
E-Mail: sales@kopp-online.de
Ulmer Straße 51 – 53
D-73262 Reichenbach/Fils
Willi Kopp e. K
Phone +49.7153.9510-0
http://www.kopp-online.de
Packaging systems
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 47 of 82, March 1, 2016
Machine Translated by Google

Kopp Labormaster HCT 3000 Specifications

General

Brand	Kopp
Model	Labormaster HCT 3000
Category	Laboratory Equipment
Language	English