Example: Cold tack process:
Page - 56 -
If NO is selected for “Graphically display”, the sealing force is displayed numerically when the sealing jaws are closed:
The cursor (highlighted in blue) is on the selection menu. Use the ÿ/ÿ arrow
key to select the desired option (Yes/No) and confirm with the ENTER key.
Example: Cold tack process:
If YES is selected for “Graphically display”, the sealing force is displayed
graphically when the sealing jaws are closed:
Seal seam strength tester Labormaster HCT 3000
Operating instructions and technical description
5.3.23.1. Display options / sealing force graphically
Inh. Ludwig P. Goals
Fax +49.7153.9510-100
E-Mail: sales@kopp-online.de
Ulmer Straße 51 – 53
Willi Kopp e. K
http://www.kopp-online.de
D-73262 Reichenbach/Fils
Packaging systems
Phone +49.7153.9510-0
Subject to errors and technical changes!
Labormaster Version 2.6.3 SW 2.2 from 03/2016 Page 56 of 82, March 1, 2016
Machine Translated by Google
To Next Page
Loading...
Need help?
General