2 Turning Effects ON and OFF
In the Play Mode individual effects in a Chain can easily be turned on and off using the
double function edit controls. This function makes h very easy to modify an effects program
in real time during a live performance or studio session.
1. Press the PLAY key to select Play Mode.
The Play Mode indicator lights up.
2. Select a program.
3. Press the double function edit control Immediately below the displayed name of the
effect to be turned on or off.
An effect is on when the effect name is shown in capital letters and the indicator of the double
function edit control is turned on; an effect is off when the effect name is shown in lowercase
letters and the indicator of the double [unction edit control is not lit.
4. Press the double function edit control to turn the effect on again.
•
The display on the RE1 indicates that an effect is ON or OFF by showing its name in capital
or lowercase letters, respectively.
Effect ON/OFF settings can be saved in Write Mode.
IMPORTANT: Certain effects, such as MIXER and INPUT SWITCH, cannot be turned off by
pressing a double function edit control.
To Next Page
Loading...
Need help?
General
