Basic Operation
1 Preparation and Basic Connections
Before making connections, make sure that The POWER switch is OFF.
When connecting a guitar or keyboards:
1. Connect the guitar, etc. to the IN (Input) Jacks on the front panel.
• Connect a monaural sound sources such as a guitar to the L/MONO jack.
• Connect stereo sound sources such as a keyboard to the L/MONO and R jack.
2. Connect the mixer or guitar amplifier to the output terminal on the A1’s rear panel.
• Conned monaural sound sources such as a guitar amplifier to the L/MONO OUTPUT
jack.
• Connect to the L/MONO and R/OUTPUT jacks when playing back in stereo,
3. Set the OUTPUT LEVEL and INPUT LEVEL switches on the rear panel to -20
(dBm).
To Next Page
Loading...
