Connecting the Optional RE1 Remote Editor
Connecting the optional REI remote editor enables you to quickly perform editing
operations at a remote location.
Connecting the RE1 1. Turn off the A1's POWER switch.
2. Connect the REMOTE Jack on the rear panel of the A1 to the RE1 ' REMOTE
Jack with the cable supplied with the REI.
(Either the FCS or the RE1 can be used at any one time, not both.)
3. Turn on the A1.
The RE-1 is powered by the A1. Attach the supplied RE-1/A1 function key label to the
RE-1.
Connecting the RE-1 has no affect on the At front panel switches.
Relationship between A1
and RE1 operations.
The RE1 display
The RE1's numeric keypad (0-9) can be used in Play Mode to directly input program
numbers, and in Chain Edit Mode to directly input Chain and effect numbers.
With the exception of the map number display on the A1 during Map Play, the RE1'S
display is identical to the display of the A1.
To Next Page
Loading...
Need help?
General
