4 Setting the Master Out Volume, Noise Reduction
Threshold Level and Bypass Switching in the Play Mode
MASTER OUT Volume Control BYPASS Key
THRESHOLD Level Control
Master out
Threshold level
The master volume enables you to adjust the overall volume of the currently selected
program.
Adjust the volume with the MASTER OUT volume control.
An OUT value between 000 and 100 is displayed in the top-right portion of the display.
Use the THRESHOLD control to adjust the noise reduction level for the currently selected
program. The threshold (THR) value is shown in the A1 display.
BYPASS Switching
• Switching a program to another causes the master volume and noise reduction
threshold levels set in Play Mode to change to the values that were memorized for
the new program.
Pressing the BYPASS key toggles the bypass function, allowing you to listen lo the sound
with or without effects.
• When the bypass function Is turned on, the BYPASS indicator lights up and sound is
output without effects.
• When the bypass function is turned off, the BYPASS indicator goes off and sound is
Output with effects.
These functions are operative in all modes.
To Next Page
Loading...
Need help?
General
