2 Loading Programs from and Saving to Memory cards
This Card function allows the LOADING (in bulk) of data from ROW or RAW cards into
the A1 internal memory or SAVING the A1 internal memory to RAM cards. This data
consists of 100 programs and the Map Play program settings.
► ROM (Read Only Memory)
Card
► RAM (Random Access Memory)
card
ROM cards allow data to be read only; data storage lo a ROM card is not
possible. The A1 factory-preset programs are backed up on the supplied ROM
card.
It is possible to read programs from or save program data to a RAM card.
Programs can either be read directly from a RAM card, inserted in the card slot, or
the card data can be loaded into the internal memory.
Loading card programs
into the A1
1. Insert the ROM or RAM card Into the A1 s CARD slot.
"ROM CARD INSERTED* or "(WRITE PROTECTED) RAM CARD
INSERTED' is displayed.
2. Press the UTILITY Mode key 10 display the Global Utility Menu.
3. Press the "C" double function edit control (CARD].
4. Press the “C” double function edit control [LOAD]
5. Press the "G" double function edit control [YES] to proceed with
program loading, or the "H" double function edit control [NO] to
cancel program loading.
If an error message is displayed, press the "H" double function edit control
[EXIT] to return 10 the Global Utility Menu.
For a list of error messages, see page 61.
6. When loading Is completed, “COMPLETED
”
is displayed.
Press the “H” double function edit control [EXIT) to return to the GLOBAL
UTILITY MENU.