1 Setting MIDI Functions
The "MIDI SETUP 1" page is for the selection of MIDI channels.
Page 1 of the
MIDI Menu
Selecting the MIDI transmit-
receive channel
Rotate the "A* double function edit control to select any channel from 1 to 16.
Setting the OMNI Mode
Rotate the "G
-
double function edit control to set OMNI Mode ON or OFF.
OMNI-ON: all MIDI channels can be received.
OMNI-OFF: only specified MIDI channels can be received.
Enabling/Disabling MIDI program Rotate the "E" double unction edit control to specify ENABLE or DISABLE.
change messages
ENABLE: MIDI program change messages can be received.
DISABLE; MIDI program change messages cannot be received.
To Next Page
Loading...
Need help?
General
