Korg MPS-10 - Page 13

MPS-10 - Turning the power on/off
13
2 Enter the Setup page.
From the top page, select “Setup” and press the ENTER button to switch to the Setup page.
Select “Auto Power Off” here, and press the ENTER button. Use the VALUE knob to change the set-
ting.
Disable: Disables the auto power-off function.
30 Minutes: Automatically turns the power off if you have not operated the unit for 30 minutes.
4 Hours: Automatically turns the power off if you have not operated the unit for four hours.
Tip: This is set to “4 Hours” by factory default.
Press the ENTER button to confirm the setting, or press the EXIT button to cancel.
3 Save the modified setting.
To save the new setting, press the WRITE button.
When you press the WRITE button, a pop-up window appears.
Press the ENTER button to save the auto power-off function setting.
If you decide to cancel saving, press the EXIT button.
Tip: The WRITE button can be used from any page in UTILITY mode, provided that a sub-window such as a warn-
ing is not open.