MPS-10
-
Appendix
98
Error messages
Error messages Cause of error and how to solve
Cancelled You pressed the EXIT button during an operation that could be canceled.
Store Error
Import Error
Export Error
Setup Error
An error has occurred when writing to or reading from a file in internal memory
or on a USB flash drive.
If read/write errors occur frequently, use a different USB flash drive. Contact
our service representative if you encounter errors after several unsuccessful
tries of writing to or reading from internal memory.
Move Error An error occurred when writing to or reading from a file in internal memory.
Delete Error
Contact our service representative if you encounter errors after several unsuc-
cessful tries.
Data Load Error
An error has occurred when loading the parameter data used by the system.
Turn the power off and on again. If the error still occurs after cycling the power,
contact our service representative.
System Error
A system communication error has occurred.
Turn the power off and on again. If the error still occurs after cycling the power,
contact our service representative.
Memory Full
There isn’t enough free space in the internal memory to execute the operation
(Import SAMPLE, RECORDER, etc.).
Delete any unnecessary SAMPLE data from internal memory.
No Data Exists The track you specified when executing Export to WAV file contains no data.
No Data File Exists
There are no files present in the folder you specified with the Import SAMPLE
operation that can be imported.
Invalid Data File
The system file for updating is incorrect.
If the error still occurs after copying the system file again, use a different USB
flash drive.
Calibration Error
An error occurred when you tried to calibrate a pedal.
Try calibrating again.
Format Error
An error occurred when formatting the USB flash drive.
If an error still occurs after trying this several times, use a different USB flash
drive.
External Drive Full
The data file could not be created or stored, due to insufficient memory
remaining on the USB flash drive.
Delete any files on the USB flash drive that you do not need.
Memory Protected
The internal memory protect feature is on.
Turn Memory Protect off in the Setup page of UTILITY.
Unsupported File
The SAMPLE data format is not supported for the file you specified in Import
SAMPLE.
Supported SAMPLE data formats are WAV or AIFF (16-bit, mono/stereo, 44.1/48
kHz, up to 60 minutes long).
To Next Page
Loading...
