Korg MPS-10 - Looper; Set List; Using this Unit with the Set Lists

MPS-10 - Parameter guide
72
PAD LED......................................................................................................... 1...10
Sets the brightness of the pad LEDs.
LOOPER
The MPS-10 features a four-track looper. With the looper, you can record the same sound that’s output
from the MAIN OUT L (MONO), R jacks (what you play on the pads as well as the AUX IN/MIC IN input
audio) for endless overdubbing.
Refer to “LOOPER edit menu” ( p.59) in this manual for the detailed settings.
SET LIST
The MPS-10 features a “set list” function, which lets you recall a set list of up to eight different KITs in
the order that you like.
LIST Select.......................................................................................................1...8
Selects the set list you want to use out of the eight set lists that are registered.
LIST1...8...................................................................................................................
You can register up to eight set lists.
Using this unit with the set lists
When you select one of the lists (1–8), the screen switches to the set list edit page.
Register the KITs in the order you want within the selected set list. You can register up to 24 KITs.