Korg MPS-10 - Truncate Sample Data

MPS-10 - Parameter guide
65
SAMPLE EDIT / Truncate
Use this to truncate (delete) the portions of the SAMPLE before the start point and after the end
point that you set, according to the “Function Type” (explained below).
Function Type ...................................................Manual, Adjust to BPM, Attack
Function Type: Manual
Truncates (deletes) the portions of the SAMPLE before the start point and after the end point that
you set.
Before START ............................................................................................ On, Off
Enables/disables SAMPLE deletion prior to the start point.
After END................................................................................................... On, Off
Enables/disables SAMPLE deletion after the end point.
Function Type: Adjust to BPM
Truncates or adds to the end of the SAMPLE data so that it matches the specified number of mea-
sures, time signature (beat) or the SAMPLE length specified by the BPM.
Measure ................................................................................... Off, 0.5, 001...999
Sets the number of measures of the SAMPLE to be created.
Beat..................... 1/2...24/2, 1/4...24/4, 1/8...24/8, 1/8t...24/8t, 1/16...24/16
Sets the beat (time signature) of the SAMPLE to be created.
BPM...............................................................................................30.00...300.00
Sets the BPM of the SAMPLE to be created.