Korg MPS-10 - SAMPLE Adjustments and Edits; Normalize Sample Volume

MPS-10 - Parameter guide
64
SAMPLE / SAMPLE
Use this screen to adjust the length of the recorded SAMPLE, set the loop and make other edits.
Note: To edit a SAMPLE, there must be enough equivalent free space in internal memory.
SAMPLE / SAMPLE EDIT
Four editing modes are available for editing the recorded SAMPLE.
Note: If there isn’t enough free space available, you can’t use some of the operations to change the SAMPLE
length.
SAMPLE EDIT / Normalize
If the SAMPLE volume is too low, you can raise the volume to the point where the SAMPLE doesn’t
clip (distort).
Peak Level .............................................................................................1%...100%
Sets the peak volume level for the SAMPLE, as a percentage of the highest level at which the SAMPLE
does not clip.