Korg MPS-10 - Data Management; Import & Export Operations Overview; Managing All User Data

MPS-10 - Parameter guide
76
3 The calibration is finished when you see the message “Complete!”
Data Management
From this screen, you can import, export, change the filenames and registered categories, delete and
perform other operations on the various data used by the MPS-10. Connect a USB flash drive to this
unit.
Note: You can’t use the “Import & Export” functions if you haven’t inserted a USB flash drive.
Import & Export
This screen is for exporting or importing the various data used by the MPS-10, to or from a USB flash
drive.
Each data item used for “All User Data” and “LOOPER Data” contains multiple files, which are
imported or exported all at once as a folder.
Import & Export / All User Data
“All User Data” includes all the settings and data (KITs, INSTs, SAMPLEs, looper and UTILITY) that are
saved.
Move the cursor to “All User Data” on the Import & Export top page, and press the ENTER button to
enter the Import & Export page for “All User Data”.