14
20.
ARPEGGIATOR button
Switches the arpeggiator on/o. Hold this down to turn the arpeggiator latch function on/o. See
“Performing with the arpeggiator”, p.21.
21.
SEQUENCER/FAVORITES button
Selects the function that will be used by the STEP 1–16 buttons. When SEQUENCER is selected,
the buttons will act as step buttons for the step sequencer. See “Playback and recording on the
step sequencer”, p.30. When FAVORITE is selected, you can assign the programs you like to
the STEP 1–16 buttons and recall them instantly. See “FAVORITE function”, p.20.
22.
PLAY button
is starts and stops playback of the step sequencer. When switching to playback, the sequencer
will always be reset to the rst step. While holding down the SHIFT button, press the PLAY
button to set key trigger mode.
23.
REC button
Enters step sequencer recording mode. When the sequencer is stopped, this will begin step
recording; and when the sequencer is playing back, this will begin real-time recording.
24.
CLEAR button
When the step sequencer is playing back, the sequence will be muted while this button is pressed.
Pressing the button in real-time recording will delete the notes that play during that time. At any
other time, you can hold down this button and press a step that you want to delete using the
STEP 1–16 buttons. See “Selecting steps to be muted”, p.32.
25.
DUP. button
To copy a selected step to another step, hold down this button and press the copy source and
destination steps using the STEP 1–16 buttons. See “Copying step information”, p.31.
26.
STEP 1–16 buttons
If you press the SEQUENCER/FAVORITES button while SEQUENCER is selected, you can turn
steps on/o in the step sequencer, edit the sequence data or select the steps displayed. See “4.
Using the step sequencer”, p.29.
If FAVORITES is selected, you can use the STEP 1–16 buttons to recall the programs you
registered. See “FAVORITE function”, p.20.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
