KORR CardioCoach PRO - Manage Groupings; Manage Locations

Product Overview
Installation and Settings
CardioCoach Operation
Important Notes
Quality Test Procedures
Maintenance
CardioCoach PRO User Manual | Page 25
either heart rate, or VO
2
readings from the test. Several methods for
defining workouts zones are provided:
• AT Threshold (default)
• % VO
2
Max
• % HR Max
• % HR AT (Anaerobic Threshold)
To set up workout zones, follow the steps below.
1. From the Settings menu, click or tap Workout Zones on the left side
of the screen.
2. Use the dropdown box to select a method.
3. As needed, use the + or – buttons to increase or decrease the
percentages.
4. Click the Save button.
5. Restore Defaults returns ONLY the settings on this Workout Zones
screen to factory default settings.
Manage Groupings
A facility may use groupings as a way to organize their clients. For example,
a training group or race group may be defined.
To set up Groupings, follow the steps below.
1. From the Settings menu, click or tap Manage Groupings on the left
side of the screen.
2. Click the Create Grouping button at the bottom of the screen.
3. Enter a label for the grouping.
4. Click the Save button.
5. Repeat steps 2-4 to add more groupings as desired.
6. To edit a grouping name, click on the name of the grouping. Enter
any changes and click Save.
7. Use the Search option to locate a particular grouping from a long list.
Manage Locations
If you are using the CardioCoach PRO at multiple locations, you can enter
various locations to help you organize and sort clients and their test results.
Use the Manage Locations option to add locations.