Installation and Settings
CardioCoach PRO User Manual | Page 94
The warranty does not cover: a) consequences caused by accident, abuse,
tampering, misuse, alteration, or other external causes; b) consequences
caused by operating the product outside of the permitted or intended uses
as described by KORR; c) consequences caused by failure to follow KORR’s
specific operating instructions; d) consequences caused by service
performed by anyone other than a KORR representative or at a KORR
authorized repair station; e) use of a faulty breathing device not
manufactured by KORR.
KORR strongly recommends use of a KORR manufactured
MetaBreatherMAX to ensure measurement accuracy. KORR cannot
guarantee the ability of this product to accurately measure metabolic rates
when a breathing device other than a MetaBreatherMAX is used.
Furthermore, improper or incorrectly performed maintenance or repair
voids the warranty.
To the extent permitted by law, this warranty and the remedies set forth
above are exclusive and in lieu of all other warranties, remedies, and
conditions, whether oral or written, statutory, express, or implied. If KORR
cannot lawfully disclaim statutory or implied warranties, then to the extent
permitted by law all such warranties shall be limited to the duration of the
express warranty and to the repair or replacement of the product as
specified above. Furthermore, KORR expressly disclaims any liability for
direct, indirect, incidental, special, or consequential damages of any nature.
If any term of this warranty is held to be illegal or unenforceable, the
legality or enforceability of the remaining terms shall not be affected or
impaired.
Service Policy
KORR Medical Technologies provides Warranty Service Support to its
customers for products under standard or extended KORR warranty.
Service requests can be submitted via the web at www.korr.com or by
telephone at (801) 483-2080. Details for shipping service items to the KORR
factory are available for download on the KORR website.
KORR also provides factory direct technical support to its customers
through a technical support group located in Salt Lake City, Utah. It is
suggested that any person calling in for technical support have the
inoperative equipment available for preliminary troubleshooting as well as
product identification.
To Next Page
Loading...